Make America Great Again Ankle Bracelet

Download Article

Download Article

Talocrural joint bracelets telephone call to heed carefree summertime days, long floral skirts, and the smell of fresh cut grass. They are a symbol of friendship and a unique accessory to add to any outfit. They are like shooting fish in a barrel to make at dwelling house and tin exist great gifts to loved ones or friends. With the right tools and creativity, y'all'll be crafting gorgeous ankle bracelets in no time.

1. ane

   Gather your materials. To make your talocrural joint bracelet, you will need cord. You tin can utilize one colour, or an assortment. You'll need 3 pieces of string for this type of ankle bracelet. Y'all can detect the string at arts and crafts stores. When picking out the colors, be sure to choose a set that either means something to the person yous're making the ankle bracelet for or just goes well together.

   • Colorful string
   • Pair of scissors
   • Tape-mensurate
   • Safety pin or record

2. 2

   Mensurate your ankle. Using your tape measure, tape around the spot on your ankle where you want your ankle bracelet to sit. Next, add 6 inches (xv.two cm) to this measurement. This gives you plenty of room to tie the talocrural joint bracelet. Cut your cord here.^[i]

   Advertisement

3. 3

   Tie a knot. Tie all three of your strings together in one knot at the end. Get out an inch above the knot so that you tin can tie information technology once again after you consummate your talocrural joint bracelet.

4. 4

   Anchor your string. Apply tape or a prophylactic pivot to anchor your string. Attaching it to something steady will brand it much easier to work with. You can attach it to anything that volition agree it yet.

   • The leg of your pants
   • A binder
   • The table
   • A pillow

5. 5

   Kickoff your staircase. With your strings anchored, knot at the side, grab hold of two strings. Concord these straight and wrap your 3rd cord around these two and pull it into a knot. Y'all'll exist able to run across the knot on the side of the string. Using this aforementioned thread, repeat this step 10-fifteen times.^[2]

   • Be certain to concur your two center strings as straight and tight as possible. This will brand tying the knots easier considering it volition continue them out of the fashion of your staircase.

6. 6

   Switch colors. It'southward just that easy—pick your next colour string after you've reached the length you lot want for the start one. Concord the other two straight and use your new color to tie a knot effectually them. Repeat this for x-xv knots. Go on this staircase for the length of your ankle.

   • If you notice that a knot isn't sitting correctly, y'all tin can easily undo it. However, this gets more and more difficult because your staircase gets tighter equally you go; so pay attention and catch the mistake early.

7. 7

   Exam the length. Once you have approximately four actress inches of string, test the length of your ankle bracelet. If it is non yet long enough, continue your staircase and check again later you complete a color.

8. viii

   Tie and cutting. Now that your ankle bracelet is long enough, tie information technology around your ankle, or the ankle of the person you lot're giving it to. Use a potent knot and cut the excess string away.

Advertisement

1. i

   Measure out your string. One piece volition nigh likely be too weak to hold beads, using two or iii strings volition lengthen the lifetime of your beaded talocrural joint bracelet. Cut your string at your ankle length.

2. ii

   Observe the center of your talocrural joint bracelet. Do this by taking all 3 pieces of your string and lining them upwards. Now fold them in half. Mark this spot with a pen.

3. 3

   Thread your center bead. Choose which bead you lot want in the center of your ankle bracelet and slide it onto the string. Move it down to the point that y'all simply marked and tie knots on either side of it. This is at present your center dewdrop.

   • Beads can represent your outfit, mood, or personality. Choose beads that convey the message that you lot want.

4. 4

   Utilise a toothpick. In order to slide the residue of your beads onto your ankle bracelet, fold your string over a toothpick. This will exist thin enough for your beads to fit over, simply strong enough to keep your string from fraying at the ends.

5. v

   Mensurate ½" from your center bead. Using your tape mensurate, marker ½" abroad from your eye bead in both directions. Tie a knot at this spot and slide your next bead onto your talocrural joint bracelet. Knot it again afterward the bead is in place.

6. 6

   Continue beading. Keep measuring ½" from each bead and fill up your talocrural joint bracelet with evenly spaced beads. Be sure to knot each one on both sides of the bead and so that they stay where y'all want them.

7. 7

   Test the length. Once you accept beaded your talocrural joint bracelet until there is approximately 2" of thread left on each side, exam the length around your talocrural joint. If you want to add one, or you need to take one off, at present is the time for those adjustments.

8. 8

   Use a clasp. For a beaded ankle bracelet, information technology is smart to use a squeeze considering the beads are heavier than just the cord. A lobster clasp is the all-time for an talocrural joint bracelet and is hands tied onto each side.^[3]

   • Y'all don't necessarily have to utilize a squeeze, but it extend the life of your beaded ankle bracelet if you practise.

Advertisement

Add New Question

• Question

  How long does this procedure accept?

  

  Non very long, it took me almost xx minutes, but I take small ankles. Information technology may take a bit longer if your ankles are bigger.

• Question

  How exercise I attach the latch?

  

  To adhere the latch you simply tie the terminate of the remaining cord to the the little hoop at the end of the latch.

• Question

  Can I use wool instead of string?

  

  Information technology may be difficult to cord beads onto wool, but wool will work fine for the first method.

Show more answers

Advertisement

Thanks for submitting a tip for review!

Near This Commodity

Article Summary X

To make an ankle bracelet, start past measuring your ankle with a tape measure. Then, cutting out iii unlike colored strings that are 6 inches longer than your ankle measurement. One time you've cutting the strings, tie them together about an inch from the end then you have room to fasten your bracelet when it's done. Counterbalance the knot-terminate down with a newspaper weight or clench it in a binder or clipboard to keep information technology nevertheless. Later you've secured the strings, hold 2 of them direct, wrap the 3rd cord around them, and knot it through itself. Echo this 10-15 times with the same thread. Adjacent, repeat the process with a different colored string and switch colors every x-fifteen knots to make a pattern. When the pattern stretches far enough to fit effectually your talocrural joint, necktie the ends together with a double knot and cut away the leftover string to cease your bracelet. For more than tips, including how to make a beaded ankle bracelet, read on!

Did this summary assist you?

Thanks to all authors for creating a folio that has been read 217,529 times.

Did this article aid yous?

howardtwoubleff.blogspot.com

Source: https://www.wikihow.com/Make-Ankle-Bracelets

Share this post